How We Analyses Your Inquiries
 STAGE #1
The Concept
Everything begins with your idea, or concept. It may be as simple as a verbal description of a new part or as detailed as an existing part that previously established specifications. We will discuss with you regarding your requirements and your expectations of the part to be produced. We will try to use existing mold to fit your requirement if not, we will build and manufacture one for you.
 STAGE #2
Tooling and Design
Once the quotation has been accepted, the molding tool will be designed and manufactured.The tooling can be manufactured from aluminum, steel, or other alloy depending on the requirements of the mold. The new mold will be inspected to according specification before the engineered application mix is poured into it. We will also create the finished part drawings and other inspection routines, so that
these parts can also be inspected during the rest of the process.
 STAGE #3
Pouring Application
The mold will then move to the plastic workstation and a sample part engineered application mix will be poured into it. We will then use your previously established formulations to make a sample that will conform to your design requirements.
 STAGE #4
Inspection and Approval
All sample parts will be compared to standards established during the initial stages of the process. Once we have confirmed that standards have been met, we will send you the part for your approval. Production begins only after you confirm the initial part meets your requirements. |
